Scientists successfully generate electricity using freshwater and saltwater

By simply utilizing what nature has to offer in terms of water, scientists from Stanford University have developed an effective way to generate electricity naturally and without causing pollution. Yi Cui, associate professor of materials science and engineering at Stanford, and his colleagues have developed a system that generates electricity using electrodes and a combination of freshwater and saltwater -- and nothing more.

The process involves the utilization of ions found naturally in saltwater, as well as those generated by electrodes submerged inwater. A positive and negative electrode pair are first used to charge freshwater with ions, which is then drained and replaced with saltwater. The saltwater, which is naturally up to 100 times more ionic than the freshwater, increases the voltage causes a net gain inelectricity. This electricity is then captured and stored in large batteries.

"The voltage really depends on the concentration of the sodium and chlorine ions you have," Cui said. "If you charge at low voltage in freshwater, then discharge at high voltage in sea water, that means you gainenergy. You get more energy than you put in."

To view a diagram that visualizes how the technology works in practice, visit:
http://www.eurekalert.org/multimedi...

For the positive electrode, the team chose manganese dioxide as the primary material because this compound is environmentally-friendly, plentiful, and viable for large-scalepowergeneration systems. The team is still searching for a practical negative electrode material, however, as the silver used in the experiments is too expensive for large-scale use.

Optimal locations for Cui and his team's power generators would be along river mouths and estuaries where freshwater naturally mixes with saltwater as it flows into the sea. According to the team's calculations, if every river in the world were to be equipped with these water power generators, the energy produced would represent 13 percent of the world's current overall energy consumption.

Sources for this story include:

Learn more:http://www.eurekalert.org/pub_releases/2011-03/su-sru032911.php

Source: Natural News

Two Toroid Over-Unity Gabriel Device

David Klingelhoefer has designed and tested a variation of Thane Heins' Bi-Toroid Transformer that outputs more power than is consumed. He has been able to get the primary circuit consumption down to 60 watts, while outputting 480 watts -- 8x overunity. 

Conventional transformers do not produce a gain of energy. The more power you try to extract from a transformer the more power the system consumes. This is due to a fundamental principle called, "Back EMF." 

The Canadian inventor Thane Heins has developed a transformer in which the back EMF takes another route (does not return to the primary) and hence decouples the input from the output; and in the process is able to get more energy out than is put in. David Klingelhoefer has simplified Thane Heins' setup and potentially improved upon it. 

Conventional Transformer Theory

To understand Thane Heins' transformer and the fundamental modifications David has made to it, having a grasp of basic transformer theory is helpful. Please do not be alarmed! It is not as complex as you may think. Here is a great site that provides a graphically illustrated explanation of basic transformer theory.

The above link utilizes a solenoid as the transformer core material. However, the same concepts apply to toroidal transformers. By studying the presentation at the above link, you will learn how the current flowing in the secondary produces a magnetic field (back EMF) that works against the magnetic field that created it. When the magnetic field that induced the current in the secondary is weakened, more current starts to flow in the primary. This effect "balances the books" in a conventional transformer, preventing you from getting more power out than you put in.

Thane Heins Bi-Toroid Transformer

A good graphical representation and explanation of Thane Heins' Bi-Toroid Transformer can be found atrexresearch. His transformer is roughly the shape of a figure eight, or two toroids side by side sharing a common center. Instead of only having one primary and one secondary (as in a conventional transformer), he has one primary and two secondaries. The primary is on one end of the figure eight, the first secondary is in the middle, and the final secondary is at the other end of the figure eight. In addition, the half of the figure eight in which the primary is wound is composed of a low permeability material (not as easy for a magnetic field to travel through). The other half is composed of a high permeability material (easier for a magnetic field to travel through). 

When the primary is pulsed in his system, a magnetic field is induced in the first half of the toroid core. This changing magnetic field produces a current flow in the first secondary coil (the one wound around the middle segment of the figure eight). Normally, if there was not an additional half of this transformer, that current flow would create a magnetic field that would work against the field that created it. This would unrestrict the primary and allow input power consumption to grow. However, in this system, with an additional half (the other half of the figure eight that is of a higher permeability than the first half), the magnetic field produced by the current flow in the first secondary does not fight against the field that created it. Instead, it avoids the path of greater resistance (the lower permeability material of the first half of the figure eight) and follows the path of least resistance (the higher permeability material of the second half of the figure eight). It then induces a current in the final secondary on the opposite side of the primary. Apparently, the power produced from this coil can be harnessed to perform work.

By not opposing the field that created it, the magnetic field produced by the first secondary prevents the transformer from consuming any "real" power. Because the system is utilizing alternating current all the energy that is stored in the transformer core material each cycle is returned back to the source. This is called, "reactive power" and is continually returned to the source. The output of the system can be considered "free."

Thane Heins has performed demonstrations on YouTube in which his system consumes zero or almost no "real" power (all the "reactive power" is returned to the source) and outputs over ten watts. 

 

Aviso Ponders Open Sourcing his Self-Running Electric Car Technology

 Ismael Aviso is considering open sourcing his technology that harvests energy from the environment on the fly to keep a 11-kW DC motor running.  He said he'll give it three months to decide whether to continue the investor route, or pursue the open source route.  Both involve common pre-requisite steps including plans preparation, replication....
Ismael Aviso talks about his self-running electric car as it is being tested at the Philippine DOE facility February 24, 2011.

by Sterling D. Allan
Pure Energy Systems News

If ever there has been a need for a cheap alternative to oil it is now, with unrest in the Middle East driving up oil prices and the world's economy spiraling downward.  And gratefully it looks as though a solution is arising from a humble yet brilliant inventor in the Philippines.

We have posted several stories this month about Ismael Aviso, the Filipino inventor who has come up with a way to keep a single 12-volt battery topped off, which powers an 11-kilowatt DC motor to power his electric car, pulling energy from the environment in the tradition ofNikola Tesla's Pierce Arrow.

We're talking an electric car that could drive endlessly, without having to stop to recharge, because the charge is coming from the surroundings, continuously.  Not only that, we're talking a solution that is cheaper than oil and cheaper than the traditional electric vehicle.  So not only does it break our addiction to oil, but it eases the financial pressure that we've grown accustomed to with having to pay so much to fill up a tank.

Could it really be true?

I've been covering free energy since 2001, and I have to say that this one looks really good.  While there are a lot of highly promising clean energy technologies coming forwarding right now, this one is a leader.


Background

This past week Aviso had two milestones.  First, his technology was featured on the biggest national television channel.  Second, his technology was tested by the Philippine Department of Energy, whose full report is pending next week. (Ref.) The test showed that his DC motor was just 45% efficient when running off outlet power, which is about what you would expect for a typical DC motor; but when it was hooked up to Aviso's on-board ambient antenna system, it ran at 133% efficiency – overunity.  This is the first instance that I know of in which a nation's department of energy has validated any kind of overunity system that pulls energy from an unseen and not yet understood source.

Acting on Aviso's request of several months, the Philippine government set up a special energy investigating team TEC (Technical Evaluation Council) to review his technology; after evaluating the credibility of Aviso's videos showing the potential of energy power; as well as considering that he had traveled to places like Sweden, Britain, and the Caribbean Islands to demonstrate his discovery to possible investors.

Aviso originally came up with the technology concept on his own, then fine tuned it with help from numerous people on forums. Simply put, he said he combines the high frequency shorting effect pursued by Nikola Tesla, with the back EMF from the DC motor, to create a carrier wave to harness ambient energy. (Ref.)

Aviso estimates that once commercial, a retrofit of an existing vehicle might cost around $4,000 retail – and this would enable a once-petrol vehicle to be electric, with a battery pack that stays charged, even as it is driving down the road.

Here's a video that our friend, Ashtweth of Panacea-BOCAF, compiled yesterday from recent video footage, adding a voice-over description, talking about the antenna system that harvests ambient energy from the surroundings, the repelling force, the recent coverage on Philippines Channel 7, and the recent collaborative testing by the Department of Energy. Finally, he encourages donation support of this breakthrough team.

 

BlackLight's physics-defying promise: Cheap power from water

An entrepreneur with $60 million in venture funding says he's found an endless source of cheap energy. Trouble is, it violates the laws of quantum physics.

Imagine being able to convert water into a boundless source of cheap energy. That's what BlackLight Power, a 25-employee firm in Cranbury, N.J., says it can do. The only problem: Most scientists say that company's technology violates the basic laws of physics.

Such skepticism doesn't daunt Dr. Randell Mills, a Harvard-trained physician and founder of BlackLight, who recently claimed that he has created a working fuel cell using the world's most pervasive element: the hydrogen found in water.

"This is no longer an academic argument," Mills, 50, insists. "It's proven technology, and we're going to commercialize it as quickly as possible."

For the first time in his company's 19 years of persistent trial and error, Mills says he has a market-ready product: a fuel cell that produces a chemical reaction to alter hydrogen atoms. The fuel cell releases heat that turns water into steam, which drives electric turbines.

The working models in his lab generate 50 kilowatts of electricity - enough to power six or seven houses. But these, Mills says, can be scaled to drive a large, electric power plant. The inventor claims this electricity will cost less than 2 cents per kilowatt-hour, which compares to a national average of 8.9 cents.

While his business has been working on the "BlackLight Process" since its inception almost two decades ago, Mills developed the patented cocktail that enables the reaction - a solid fuel made of hydrogen and a sodium hydride catalyst - only a year ago. (He recently posted instructions on the company's Web site,blacklightpower.com). Now that the device is ready for commercialization, he says, BlackLight is negotiating with several utilities and architecture and engineering firms, but he won't disclose any partners' names until the deals are finalized.

Read the rest of this article here or follow the source link below...

Source:


www.cnn.com

Swedish Physicists Hanno Essén and Sven Kullander Test Rossi’s Energy Catalyzer, Believe it Produces a Nuclear Reaction.

The swedish web site NyTeknik has a report from Swedish physicists Hanno Essén and Sven Kullander who have a conducted a new test of Andrea Rossi’s Energy Catalyzer and in their opinion some kind of nuclear reaction must be taking place to produce the amount of energy they measured.

In a detailed report they stated “Any chemical process should be ruled out for producing 25 kWh from whatever is in a 50 cubic centimeter container. The only alternative explanation is that there is some kind of a nuclear process that gives rise to the measured energy production.”

The two researchers tested a smaller version of the E-cat than had been used by different testers earlier this year. This one achieved a power output of  4.4 kW.

Kullander said “My belief that there is an energy development far beyond what one would expect has been strengthened significantly as I have had the opportunity to see the process for myself and perform measurements.”

Essén reported,“Everything that we’ve found so far fits together. There is nothing that seems to be strange. All people seem to be honest and competent,”

Source: Freeenergytimes , NyTeknik

Researcher Sterling D. Allan introduced some amazing free & alternative energy technologies which could have the potential to eliminate the need for oil, nuclear, and other polluting energy sources. The days of the old energy monopolies are numbered, he said, adding that "it's time for free energy to emerge," empowering the people in a new revolution. 
A variety of promising solutions are making their way to market. Andrea Rossi, joined the program for a segment , to talk about his 10 kilowatt cold fusion device, which is clean, inexpensive, and though it involves a nuclear reaction, creates no radioactive waste. In the short term, his device will be offered in industrial use, for heat and power, he reported. Allan also mentioned other exciting developments including PlasmERG's Noble Gas Engine, which runs on fuel that would only cost a few dollars a month, and Aviso Technologies out of the Philippines, which uses Tesla-like circuitry.
Read more here or click on source below...

Source:

www.pesn.com

Tesla Chargers World’s Most Efficient, Effective & Advanced Battery Chargers

(Tesla Chargers) Welcome to TESLA CHARGERS, the home of the most efficient, effective and advanced battery chargers in the world.

I know this does not sound "too modest", but I think you will agree if you take the time to explore our product line and test this equipment for yourself. Just read some of the ASTOUNDING RESULTS that other people like you are getting by reading our Testimonials page!

In our rapidly expanding digital world, portable devices are popping up everywhere. From cell phones, to MP3 players, to laptop computers, to power tools, to LED lighting, to electric cars, every one of these things runs on batteries. More than ever before, our carbon footprint and our over-all pollution footprint depends on how efficiently we can charge those batteries and how long we can keep them in service and out of the landfill.

This rapid proliferation of devices has also had an unexpected side-effect. In most cases, each and every battery in all of these devices is different, and needs a different battery charger to charge it up. By now, most of us have between 5 and 10 different battery chargers all over the house. Many of these batteries are also expensive to replace, and only seem to last a year or two. This unfortunate situation has a variety of hidden costs built into it, and begs for a simple solution.

Now, that SOLUTION has arrived. The Universal 1AU charger from TESLA CHARGERS will charge ALL of these different types of batteries AND keep them in service for many years to come. And that is just one example in our astonishing line-up of Products. From 1.5 Volt AAA batteries all the way up to the full-sized Electric Car, TESLA CHARGERS has a solution for your battery charging needs.

Our Inspiration

In 1888, Nikola Tesla ushered in the Electrical Age with the invention of the 60 cycle AC power grid. It was Tesla's far-reaching genius that fore-shadowed today's Digital Revolution. Our company name, TESLA CHARGERS, is a tribute to this brilliant problem solver of an earlier age. Nikola Tesla was the first to explore the benefits of Pulsed DC Currents, and their unique applications to lighting and power production.

TESLA CHARGERS is proud to bring this technology into the 21st Century to provide the most advanced battery charging solutions available today.

Mission Statement

Our digital revolution depends on battery power, and our environment depends on good stewardship and responsible energy use. We at TESLA CHARGERS promise to bring these two purposes together to provide you, our customer, the most efficient battery charging solutions on Earth.

If a better technology comes along, we'll offer it here!

Bron:


www.teslachargers.com

5e Nieuwsbrief Stichting FreeEnergy4All

Beste belangstellende in de ontwikkelingen van Vrije Energie.

Ik zie dat het al weer 3,5 maand geleden is dat ik de laatste nieuwsbrief rond stuurde dus zullen jullie als ingetekenden op de site www.FreeEnergy4All.nl wel nieuwsgierig zijn naar de stand van zaken. Eigenlijk wachtte ik nog met deze nieuwsbrief tot dat er grootse dingen te melden zouden zijn. Echter die laten helaas toch nog wat op zich wachten, ondanks dat er wel hoopvolle ontwikkelingen zijn.

Hoewel ik al eerder schreef dat na al mijn bezoeken all over the World alles er op wees dat we “het” zelf moesten doen, dus zelf een Vrije Energie apparaat ontwikkelen, betekent dit tegelijkertijd dat hiermee “veel” tijd gemoeid zal zijn omdat alleen via heel veel trial and error een mogelijke oplossing gevonden kan worden.
De vraag is echter of we niet in staat zijn om beslag te leggen op een apparaat dat al ontwikkeld is en voor een acceptabel bedrag te kopen en te produceren is?  Dit geeft meteen al een enorme voorsprong!

Welnu ik denk dat we daarin in de tussentijd geslaagd zijn ook al zijn daarmee nog niet alle hobbels genomen. Ik heb vrij goede contacten met een Chinese uitvinder kunnen leggen die reeds een Vrije Energiemotor van 5kW(!) ontwikkeld heeft. Heel aantrekkelijk bij deze motor is dat hij vrij compact is en er binnenin nauwelijks elektronische componenten aanwezig zijn. Hierdoor is de motor waarschijnlijk voor een redelijk bedrag te produceren zonder al te veel ruimte in te nemen. Wel moet hij nog uitgerust worden met een reductie en generator voor elektriciteit opwekking. Op de bovengenoemde website wordt al verwezen naar deze unit en is ook te vinden op: http://www.free-energy-info.co.uk/Wang.pdf 

Inmiddels zijn er bedragen afgesproken met de uitvinder voor de koop van de tekeningen en de knowhow en daarna voor een bedrag als de unit eenmaal bewezen heeft dat hij doet wat ervan wordt verwacht. Het probleem is hierbij echter dat we geen kat in de zak willen kopen dus dat we pas willen betalen als we zeker weten dat we daadwerkelijk zo’n unit hebben die doet wat hij moet doen. We hebben deze man dan ook uitgenodigd om naar Nederland te komen en hier onder zijn leiding deze motor te bouwen, te testen, enz. Een alternatief is geboden om in China speciaal voor ons zo’n apparaat te bouwen, daar te testen en na goedkeuring naar Nederland te laten komen. 
In zijn laatste mail heeft hij ons echter laten weten dat hij niet naar Nederland “kan” komen en dat het ook niet mogelijk is om daar een unit te bouwen en mee te nemen naar Nederland omdat deze simpelweg niet uitgevoerd kan worden. We verzinnen nu nieuwe opties omdat ik echt het vertrouwen heb dat deze unit de meeste potentie heeft voor onze doelstellingen van alles wat ik inmiddels gezien heb. Hij heeft aangegeven dat zijn prototypen, die momenteel in een lab van een universiteit in Beijing getest worden, in mei ten toon gesteld gaan worden. In ieder geval een optie om daar dan heen te gaan. Een andere optie is om hem nu al te bezoeken om op een goede manier hem persoonlijk te ontmoeten, beter te leren kennen en verschillende alternatieven verder te bespreken. 

Als het lukt om een dergelijke unit naar Nederland te krijgen dan moeten er nog allerlei zaken geregeld worden voordat hij definitief in productie genomen kan worden zoals: 
-netkoppeling mogelijk maken ook al kan hij ook stand-alone draaien want er is geen “input” nodig,
-certificering, dus officiële goedkeuring, is belangrijk,
-het elimineren van eventuele kinderziekten,
-verdere optimalisering om de grootste energiedichtheid te bereiken,
-het testen op gebruiksvriendelijkheid wat betreft bv. geluid- en warmte-productie,
-alle eigenschappen zodanig leren kennen dat verschaling naar zowel kleiner als groter mogelijk is.
-enz.

Ondertussen heb ik ook nog diverse andere contacten met uitvinders en uitvindingen die ook potentie hebben. Echter daar is nog meer tijd mee gemoeid. Het is nu eenmaal niet mogelijk om ijzer met handen te breken.

Ook zullen jullie je mogelijk afvragen hoe het met de financiële situatie van de Stichting FreeEnergy4All is gesteld na de oproep in december 2010?
Welnu er is tot nu toe een bedrag geschonken van Euro 12.000,- en dit is uiteraard niet voldoende om de rechten voor een Vrije Energie unit te kunnen kopen. Wel hoopten we met de oproep over meer middelen te kunnen beschikken. Daarom stellen we het nog steeds op prijs als je alsnog een gift zou doen welke later in mindering wordt gebracht bij de aankoop van een VE-unit. Zie alle voordelen hiervan in de 4e nieuwsbrief op de website. 

Inmiddels zijn we ook op zoek naar grotere investeerders en er blijkt dat men in het algemeen niet staat te springen om in ons project te stappen (hoe aantrekkelijk ook!) zo lang er nog geen definitief werkend apparaat is, want dat overtuigt pas echt. Toch hebben we inmiddels goede contacten kunnen leggen met mensen die al wel willen investeren zodra aan een aantal basisvoorwaarden wordt voldaan. Om dit daadwerkelijk te realiseren wordt momenteel hard aan gewerkt.
Indien je interesse hebt om zelf in grotere bedragen te participeren tegen aantrekkelijke voorwaarden laat ons dit dan weten. We zullen je dan de voorwaarden daarvoor graag toesturen. Zo worden er certificaten vanaf 
€10.000,- beschikbaar gesteld en wordt er gestreefd naar maximale zekerheid. 
Ook hebben we een verzoek tot financiële ondersteuning ingediend bij de Stichting Doen. Daarnaast onderzoeken we nog alternatieve financieringsbronnen vanuit de overheid.
Wij danken jullie voor de vele positieve reacties die we regelmatig ontvingen en we blijven er voor gaan, ja, in dienst van het grote geheel.

Wordt vervolgd…….!

Warme groet, 
Het bestuur van Stichting FreeEnergy4All,
Voorzitter: Dick Korf 
Penningmeester: Hans Steenbeek,
Secretaris: Peter Klaren
Website: www.FreeEnergy4All.nl