Operating Stanley Meyer's Voltage Intensifier Circuit (VIC)

Photo: alexpetty.com

From information in the patents and technical documentation written by Stan Meyer, it is clear that the Voltage Intensifier Circuit (VIC) is the key to Meyer's claim of deriving oxyhydrogen gas from water while consuming almost no power. According to Meyer, this effect can best be achieved by constructing an asymmetric capacitor made from stainless steel tubes arranged co-axially using water as a dielectric and subjecting the water to a very specific cycle of energization.

Read further here and here.




Source: AlexPetty.com

Wilhelm Mohorn: Oostenrijkse Vereniging van Ruimte Energie

Foto: guteswasser.at

Ruimte energie of nulpuntenergie wat verstaan we daar onder?
Hierbij een videofilm van de Oostenrijker Wilhelm Mohorn die dit duidelijk maakt en ook met praktische voorbeelden komt.
Voorzitter van de Oostenrijkse Vereniging van Ruimte Energie

Nulpuntenergie of Ruimte energie is door de NASA in 2005 al bewezen.!!!
Nulpuntenergie of Raumenergie of ZPE of ….er zijn vele namen voor.

Nulpuntenergie is overal aanwezig, het heeft geen gewicht, het dringt overal doorheen, het komt uit alle richtingen, het is een zeer hoge natuurlijke trilling, het is sneller als licht

New! Bedini SG Advanced Book

Today, I am extremely happy to announce the release of the third book in the
Bedini SG Series, titled Bedini SG, the Complete Advanced Handbook. This is
the book that the whole Free Energy community has been waiting for! Not only
does it document how far John Bedini has been ahead of the field, but for the first
time, it completely explains the operation of the Low-Drag Generator that he
invented in 1983. The problem back then was, when he published the plans,
there was no explanation of why it worked, so no one believed it, and almost no
one built it to find out what it did.

This book solves that problem by thoroughly describing the design, the
schematics, the operation, the magnetic force vector analysis, the Lenz Law
avoidance method, and everything else you need to know to fully understand how
it works, and how to build a Low-Drag Generator for yourself. If you understand
what this means, you know it is the "holy grail" of Free Energy.

Ecat Test Report 2014: Cold Fusion (LENR) Is Real!

Picture: peswiki.com/

In an unexpected turn of events the highly anticipated test report has recently started to circulate online. Although still pending publication, ECAT.com can today confirm that this is indeed the submitted ECAT Test Report:



Observation of abundant heat production from a reactor device and of isotopic changes in the fuel


Giuseppe Levi

Bologna University, Bologna, Italy


Evelyn Foschi

Bologna, Italy


Bo Höistad, Roland Pettersson and Lars Tegnér

Uppsala University, Uppsala, Sweden


Hanno Essén

Royal Institute of Technology, Stockholm, Sweden


Abstract


“New results are presented from an extended experimental investigation of anomalous heat production in a special type of reactor tube operating at high temperatures. The reactor, named E-Cat, is charged with a small amount of hydrogen-loaded nickel powder plus some additives, mainly Lithium. The reaction is primarily initiated by heat from resistor coils around the reactor tube. Measurements of the radiated power from the reactor were performed with high-resolution thermal imaging cameras. The measurements of electrical power input were performed with a large bandwidth three-phase power analyzer. Data were collected during 32 days of running in March 2014. The reactor operating point was set to about 1260 oC in the first half of the run, and at about 1400 °C in the second half. The measured energy balance between input and output heat yielded a COP factor of about 3.2 and 3.6 for the 1260 oC and 1400 oC runs, respectively. The total net energy obtained during the 32 days run was about 1.5 MWh. This amount of energy is far more than can be obtained from any known chemical sources in the small reactor volume.


A sample of the fuel was carefully examined with respect to its isotopic composition before the run and after the run, using several standard methods: XPS, EDS, SIMS, ICP-MS and ICP-AES. The isotope composition in Lithium and Nickel was found to agree with the natural composition before the run, while after the run it was found to have changed substantially. Nuclear reactions are therefore indicated to be present in the run process, which however is hard to reconcile with the fact that no radioactivity was detected outside the reactor during the run. “


Comments:


“Interesting to note is that the report suggests that Lithium-Hydrogen reactions are part of the Rossi-Effect. Given the 17 MeV excess energy from the Li7+H1->Be8->2He4 reaction, data in the report even supports the possibility that Lithium-Hydrogen is one of the main contributors to the excess energy from the Low Energy Nuclear Reactions (LENR) involved in the ECAT.”

- Dr. Magnus Holm, CEO, Hydro Fusion Ltd.


Download Test Report.


ECAT Test Report 2014



Source: Ecat.com

Bloom Box: New fuel cell technology that is a real step forward

Bloom Energy generates clean, reliable power onsite with minimal environmental impact, making the Bloom Energy Server™ one of the most sustainable solutions on the market today. Compared to alternative sources, Bloom delivers enhanced sustainability benefits in many ways: high efficiency, greenhouse gas emissions reductions, avoided air pollutants, small physical footprint, and reduced water use.

Bloombox fuel cells

Higher Efficiency

Bloom Energy Servers convert natural gas or renewable biogas into electricity using a direct electrochemical reaction without combustion. This highly efficient process is not bound by the same thermodynamic constraints1 for creating electricity and thus enables exceptionally high conversion efficiency. Today, Bloom ships systems with an industry-leading 60+ percent electrical efficiency, based on the lower heating value (LHV) of the fuel — a figure that has increased markedly since our first commercial shipments in 2008. Looking forward, we see a clear pathway to deliver even higher efficiency.

By contrast, the average coal-fired power plant — with over a century of R&D behind it — converts only 33 percent of its energy input into electricity.2 Yet because no one wants a coal plant in their "backyard", this electricity is generated a great distance away from the end user and must be transported via hundreds of miles of power lines, causing a portion of this power generated to become lost — anywhere from 7 - 10 percent in the developed world, and up to 50 percent3 in developing economies. Since Bloom Energy Servers typically generate power at the customer's site, energy is generated and provided directly where it is needed, thus avoiding these losses altogether.

As the world transitions to a renewable energy future, the most sustainable pathway is to consume our precious resources more efficiently. Not only is it more sustainable, but it's also smarter — fuel savings mean money savings.

The DIY Engineer Who Built a Nuclear Reactor in His Basement

Some people—myself not excluded—go to an office everyday because they can't think of anywhere else to go. We practice the prompt repression of wild ideas in exchange for remunerative employment, which to some is considered to be a kind of meaningful existence. Doug Coulter is not that sort of worker.

He may have started out behind a desk when he worked in the security business as a beltway bandit, coming up with signal processing and radio gadgets for our favorite three-lettered intelligence agencies, but in recent years, Doug's chosen to explore his engineering interests in the isolated backwoods of Virginia, absent from any pesky boss or sticky bureaucracy.

Doug's gone from being paid to play with other people's expensive toys to making his own. And although he may call them toys because of the amount of fun he derives from them, his creations are hardly ordinary playthings. Then again, Doug is no ordinary man.

After living with a meth head who had a trigger finger itchier than an Appalachian mosquito bite, Doug gave his ex-housemate the boot and confiscated his weapons, thus paving the way for his new found love for gunsmithing. Being that Virginia is one of America's more gun-friendly states, Doug's new skills made him a popular guy in the neighborhood. And instead of hoarding his knowledge of firearms, Doug has since open sourced his gun and ammo making techniques on his well-trafficked engineering forum.

Johan Oldenkamp: Electricity and Magnetism

Illustration: www.imcce.fr/

Johannes Kepler (1571 – 1630) discovered mathematical regularities in the planetary orbits within our solar system. In an attempt to explain these regularities, Isaac Newton (1642 – 1726) claimed that they were caused by gravity (after pondering over a fallen apple). If Newton would have understood electrodynamics, he would not have made this huge scientific misstep. Nowadays we know that the effect of so-called electromagnetism is 1036 time stronger than the gravity effect. Compared to this “electromagnetism”, gravity is completely negligible. Strangely enough, for the last three centuries, mainstream university “science” never corrected Newton’s misstep. Instead, this belief system called scientism rather invented more scientific fiction, like gravity waves, dark matter, dark energy, antimatter, black holes, spacetime curvature, and a “Big Bang”. However, just a small amount of common sense is enough to distinguish this fiction from genuine science. Let us therefore go back to the findings of Kepler, and combine them with contemporary understanding of electricity and magnetism.

Read further on: Pateo.nl